6 Best BSoD Fixing Tools for Windows PCs
The Blue Screen of Death (BSoD) is a common error message encountered by Windows users when their computer encounters a critical system error. This error can be frustrating and confusing, as it results in an automatic system shutdown and often a restart loop.
Fortunately, there are a number of software tools available to help diagnose and fix BSoD errors, allowing users to quickly get back up and running without long-term damage.
In this article, we will explore the best BSoD fixers, highlighting their key features and benefits.
What causes the Blue Screen of Death?
Blue screen errors can be separated into two main categories:
- Physical hardware causes.
- Operating system and/or software causes.
When there are problems with vital computer components like the RAM, processor, graphics card, or hard drive, it can quickly cause a BSoD. This can occur with new hardware that is incompatible or incorrectly installed, old hardware that’s beginning to fail, overheating, or power surges.
Other causes are based on the operating system itself, such as corrupted system files, bad settings, software conflicts, or outdated drivers. The latter disrupts the ability of Windows to effectively communicate with hardware but is not a physical hardware problem.
- If you’re quick, note down the stop code when the blue screen appears to help you identify the problem.
When do I need to use a BSoD fixing tool?
A good BSoD fixer can help diagnose and fix possible causes, though these tools are limited when there are problems with your physical hardware. Ultimately, you may need to replace failing or incompatible components to bring your system back to life.
However, most other BSoD causes can be partially or fully fixed with a Windows repair tool. If you have ruled out hardware as the cause, you should consider using one of the BSoD fixers tested below.
When do I use Safe Mode and Startup Repair?
A BSoD may happen once, multiple times, upon startup, or you may not be able to boot into the desktop at all.
If you get stuck in a restart loop or otherwise cannot boot as normal, you can try booting in Safe Mode or using the built-in startup repair tool to get back inside.
Then you can run BSoD fixing software to ensure your system is fully repaired.
- To enter Advanced Boot Options, hold the F8 key before the Windows logo would appear. From here, you can choose Startup Repair or go to Startup Settings and choose Safe Mode.
We tested a wide variety of third-party Windows repair and tune-up tools that claim to help fix the BSoD. Below we narrowed it down to 7 of the best that really did get Windows running smoothly again.
What are the Best BSoD fixing tools that really work?
1. Fortect
If you’re looking for a comprehensive Windows repair utility, then Fortect is a leading choice. It works in Safe Mode and will quickly scan your system upon launch. You can then browse different categories of Windows problems, many of which contribute to the BSoD.
For example, it repairs corrupted registry entries, missing or damaged system files and shared DLLs, and even the damage caused by malware. It does this by pulling clean files and configurations from its huge database of regularly updated Windows components.
Fortect also provides a summary of your computer’s hardware, including core temperatures. Although this won’t fix malfunctioning hardware, it can help you diagnose this as the cause.
Overall, Fortect is super easy to use and can get most people’s PCs back to full working order in a matter of minutes.
2. System Mechanic
IOLO’s System Mechanic has endless tools in its suite that can help fix Windows blue screen errors and tune up your PC. It takes a dual repair and optimization approach, replacing corrupted system files and configurations, and then getting rid of the junk.
In total, it can detect and fix up to 30,000 Windows problems automatically, including system files and DLLs, registry problems, and outdated drivers.
When your system is fixed, it can also speed things up by getting rid of temp files, bloatware and unwanted programs, memory-hogging startup programs, and by giving you more control over system resources.
The best way to use System Mechanic is to run its primary scan first and repair all problems. This should fix the BSoD before using any of the extra tools.
3. Advanced SystemCare
IOBit’s Advanced SystemCare suite performs several cleaning and optimizing tasks that can also help you recover from a BSoD. The most important of these is the automatic registry fixer which cleans junk entries, repairs corruption, and even defrags the data on your hard drive so the registry works more efficiently.
It’s also able to remove spyware and other basic malware threats, which may have played a part in your system crashing.
When it comes to hardware, Advanced SystemCare has a disk doctor tool that can scan your hard drive to find bad sectors and other errors. A lot of these could indicate that the drive is failing and need to be backed up and replaced.
The software also actively monitors your PC’s performance so you can immediately spot overheating or failing hardware, which might also be causing blue screen errors.
⇨ Download Advanced SystemCare
4. Glary Utilities
Glarysoft continues to provide an impressive set of utilities that can easily be used to solve the BSoD and other Windows problems. This includes detecting and fixing minor disk corruption, repairing the registry, and updating old drivers that might be causing conflicts.
Although its range of features might be overwhelming for a beginner, its one-click maintenance button combines all the core repair and cleaning functions in one go. For most people, this will fix Windows.
However, you can also dig into the advanced utilities to find registry defrag, hard drive defrag, and lots of system data to check for irregularities in hardware performance and settings.
Glary is also an excellent all-in-one suite for cleaning out junk and optimizing performance.
5. Wise Care 365
A wide range of tools can be found in the Wise Care 365 suite, each designed to keep Windows free of errors and in top condition. Not only does it repair and clean the registry and your entire hard drive, but it also offers defragmentation of both, which speeds up performance and allows Windows to function more efficiently.
Meanwhile, it has a real-time system monitor that keeps an eye on hardware, incoming malware, or if the software is potentially damaging the system.
For blue screen problems, the first step is to run the system checkup scan. Once complete, you can then apply all relevant fixes automatically. Then you should consider the other tools for advanced optimization and system tweaks.
6. CCleaner
While its advanced cleaning tools are what stands out, CCleaner is also accomplished at repairing Windows when things go wrong with the registry and other areas. To get started, click registry on the left side and scan for issues.
In a few seconds, it will list all of the problems, some of which may be the cause of your BSoD error. You can review and fix these before moving on to the driver updater tool, which checks your hardware and detects which drivers need to be updated.
The rest of its tools can help get rid of the junk and tune up the system, so it runs more smoothly. This includes managing startup programs, deleting temporary files, and getting rid of unwanted browser extensions.
You can also go back to a Windows restore point from within the program.
Getting a blue screen error and watching your system shut down can be alarming. However, if your hardware is ok, it’s not difficult to recover Windows.
As long as you can boot into Safe Mode, Fortect or another leading BSoD fixer will quickly repair corrupted or missing areas of the operating system, including the registry.
